Representantes
Jumbo Matic Hidráulico 3
Jumbo Matic Hidráulico 5
Jumbo Matic Hidráulico Special 5
Jumbo Matic Hidráulico Special 7
Jumbo Matic Hidráulico Special 7
LESS DISTURBANCE OF THE LAYER AND GREATER USE OF THE SOIL.
Developed to decompress the soil, including in direct planting areas, leaving the crop remains on the ground. It has flat spring arms with an automatic disarm system and a greater angle, requiring less tractor power.
Differentials
It has an arm safety system that disarms the flat spring when it meets the correct resistance, thus ensuring straightness in the work performed, automatic spring reset by hydraulic lifting.
Doesn't allow the mounting of cut-off wheels.
Technical Specifications
Coupling System |
|
Three-point |
|
Coupling pins |
|
Cat. II |
|
Required power |
|
18 - 20 HP/arm 1 |
|
Quantity of arms |
|
7 |
|
Distance between arms |
|
400 mm |
|
Working width |
|
2.800 mm |
|
Working depth range |
|
200 to 400 mm |
|
Free span under chassis |
|
640 mm |
|
Chassis width |
|
2.625 mm |
|
Overall width |
|
2.850 mm |
|
Working width of the laminar grinder roll |
|
2.900 mm |
|
Total width of the laminar grinder roll |
|
2.960 mm |
|
Total length without laminar grinder roll |
|
1.570 mm |
|
Overall length with laminar grinder roll |
|
2.240 mm |
|
Height |
|
1.310 mm |
|
Approximate weight |
|
1.075 kg |
|
Theoretical operating yield |
|
1.10 to 1.70 ha/h 2 |
|
1 - The power required is related to factors such as subsoiling depth and the level of soil compaction and moisture. | |||
---|---|---|---|
2 - Tractor displacement from 4 to 6 km/h. |
Working Depth
Work depth regulation through the articulation of the wheels, driven by the tractor's hydraulic system. The depth range is determined by the number of strokes limiting shims, located on the rods of the two hydraulic cylinders.
Subsoiler Arm
With parabolic geometry, the subsoiling arm is a tool that breaks up the compacted layer of soil without causing excessive revolving, keeping a large part of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just lift the subsoiler, making the maintenance of the system a simple operation and consequently obtaining greater yield and lower operating costs.
Grinding Roller
It follows the topography of the land, reducing the size of the clods and leveling the surface of the worked area, with a system of articulated supports and helical springs that cause effective compression to the soil, regardless of the topography of the area.