Its regulation is made through the articulation of the wheelset and the tractor's hydraulic system. The width of the depth is determined by the stop screw in the regulation mechanism, this allows the rod of the hydraulic cylinder to be fully retracted when the scarifier is working.

It is a tool that breaks up the compacted layer of the soil without causing excessive revolving, keeping a large part of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just suspend the scarifier, making the maintenance of the system a simple operation and, consequently, obtaining greater yield and lower operating costs.

It has a specific geometry for the scarification work, and is made of cast steel with a special alloy and heat treatment that gives it high resistance to wear by abrasion.

20" plain, individual and located immediately in front of each arm.

It offers better cutting conditions of the crop remains, avoids clogging in the arm and has vertical regulation through a sliding bearing and of easy regulation, with double helical springs, which allows the disc to follow the ground undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.

It follows the topography of the land, reducing the size of the clods and leveling the surface of the scarified area. It is equipped with bearings in oil-bath, articulated supports, and helical springs to ensure the stability of the set.

Its regulation is made through the articulation of the wheelset and the tractor's hydraulic system. The width of the depth is determined by the stop screw in the regulation mechanism, this allows the rod of the hydraulic cylinder to be fully retracted when the scarifier is working.

It is a tool that breaks up the compacted layer of the soil without causing excessive revolving, keeping a large part of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just suspend the scarifier, making the maintenance of the system a simple operation and, consequently, obtaining greater yield and lower operating costs.

It has a specific geometry for the scarification work, and is made of cast steel with a special alloy and heat treatment that gives it high resistance to wear by abrasion.

20" plain, individual and located immediately in front of each arm. It offers better cutting conditions of the crop remains, avoids clogging in the arm and has vertical regulation through a sliding bearing and of easy regulation, with double helical springs, which allows the disc to follow the ground undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.

It follows the topography of the land, reducing the size of the clods and leveling the surface of the scarified area. It is equipped with bearings in oil-bath, articulated supports, and helical springs to ensure the stability of the set.

Its regulation is made through the articulation of the wheelset and the tractor's hydraulic system. The width of the depth is determined by the stop screw in the regulation mechanism, this allows the rod of the hydraulic cylinder to be fully retracted when the scarifier is working.

It is a tool that breaks up the compacted layer of the soil without causing excessive revolving, keeping a large part of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just suspend the scarifier, making the maintenance of the system a simple operation and, consequently, obtaining greater yield and lower operating costs.

It has a specific geometry for the scarification work, and is made of cast steel with a special alloy and heat treatment that gives it high resistance to wear by abrasion.

20" plain, individual and located immediately in front of each arm. It offers better cutting conditions of the crop remains, avoids clogging in the arm and has vertical regulation through a sliding bearing and of easy regulation, with double helical springs, which allows the disc to follow the ground undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.

It follows the topography of the land, reducing the size of the clods and leveling the surface of the scarified area. It is equipped with bearings in oil-bath, articulated supports, and helical springs to ensure the stability of the set.

Its regulation is made through the articulation of the wheelset and the tractor's hydraulic system. The width of the depth is determined by the stop screw in the regulation mechanism, this allows the rod of the hydraulic cylinder to be fully retracted when the scarifier is working.

It is a tool that breaks up the compacted layer of the soil without causing excessive revolving, keeping a large part of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just suspend the scarifier, making the maintenance of the system a simple operation and, consequently, obtaining greater yield and lower operating costs.

It has a specific geometry for the scarification work, and is made of cast steel with a special alloy and heat treatment that gives it high resistance to wear by abrasion.

20" plain, individual and located immediately in front of each arm. It offers better cutting conditions of the crop remains, avoids clogging in the arm and has vertical regulation through a sliding bearing and of easy regulation, with double helical springs, which allows the disc to follow the ground undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.

It follows the topography of the land, reducing the size of the clods and leveling the surface of the scarified area. It is equipped with bearings in oil-bath, articulated supports, and helical springs to ensure the stability of the set.

Its regulation is made through the articulation of the wheelset and the tractor's hydraulic system. The width of the depth is determined by the stop screw in the regulation mechanism, this allows the rod of the hydraulic cylinder to be fully retracted when the scarifier is working.

It is a tool that breaks up the compacted layer of the soil without causing excessive revolving, keeping a large part of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just suspend the scarifier, making the maintenance of the system a simple operation and, consequently, obtaining greater yield and lower operating costs.

It has a specific geometry for the scarification work, and is made of cast steel with a special alloy and heat treatment that gives it high resistance to wear by abrasion.

20" plain, individual and located immediately in front of each arm.

It offers better cutting conditions of the crop remains, avoids clogging in the arm and has vertical regulation through a sliding bearing and of easy regulation, with double helical springs, which allows the disc to follow the ground undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.

It follows the topography of the land, reducing the size of the clods and leveling the surface of the scarified area. It is equipped with bearings in oil-bath, articulated supports, and helical springs to ensure the stability of the set.