Representantes
Escarificador Matic 7
Escarificador Matic 9
Escarificador Matic 11
Escarificador Matic 13
Escarificador Matic 15
Scarifier Matic 11
DESIGNED TO DISCOMPACT THE SOIL SUPERFICIALLY.
The Matic Scarifier works at an average depth of 25 cm, breaking up the compacted soil layer without disturbing it, keeping most of the plant residues on the surface and improving the porosity and water infiltration.
Differentials
It has a safety arm system that disarms the flat spring when it meets the correct resistance, thus ensuring a straightness in the work performed, automatic spring reset by hydraulic lifting.
20 inch cutting disk in front of each arm.
Rollers equipped with bearings in oil bath.
Technical Specifications
Coupling System |
|
Traction bar (with head) |
|
Minimum power required |
|
12-15 HP/arm 1 |
|
Number of arms |
|
11 |
|
Distance between arms |
|
30 |
|
Working width |
|
3,30 m |
|
Working depth range |
|
20 to 30 cm |
|
Free span under chassis |
|
630 mm |
|
Chassis width |
|
3.330 mm |
|
Overall width |
|
3.525 mm |
|
Working width of Clod-Breaking Roller |
|
329 mm |
|
Overall width of the Clod-Breaking Roller |
|
3.384 mm |
|
Total length without Clod-Breaking Roller |
|
4.770 mm |
|
Total length with Clod-Breaking Roller |
|
5.514 mm |
|
Height |
|
1.560 mm |
|
Wheelset Tire |
|
RA 45 7.5-16 10 CANVAS |
|
Wheelset gauge |
|
3.130 mm |
|
Approximate weight |
|
3.040 kg |
|
Theoretical operational |
|
1,30 to 2,00 ha/h 2 |
|
1 - The required power is related to factors such as scarification depth and the compaction level and soil moisture. | |||
---|---|---|---|
2 - Tractor displacement from 4 to 6 km/h |
Working depth
Its regulation is made through the articulation of the wheelset and the tractor's hydraulic system. The width of the depth is determined by the stop screw in the regulation mechanism, this allows the rod of the hydraulic cylinder to be fully retracted when the scarifier is working.
Scarifier arm
It is a tool that breaks up the compacted layer of the soil without causing excessive revolving, keeping a large part of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just suspend the scarifier, making the maintenance of the system a simple operation and, consequently, obtaining greater yield and lower operating costs.
Arm tip
It has a specific geometry for the scarification work, and is made of cast steel with a special alloy and heat treatment that gives it high resistance to wear by abrasion.
Cutting disk
20" plain, individual and located immediately in front of each arm. It offers better cutting conditions of the crop remains, avoids clogging in the arm and has vertical regulation through a sliding bearing and of easy regulation, with double helical springs, which allows the disc to follow the ground undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.
Clod-Breaking Roller
It follows the topography of the land, reducing the size of the clods and leveling the surface of the scarified area. It is equipped with bearings in oil-bath, articulated supports, and helical springs to ensure the stability of the set.