Representantes
Escarificador Matic 7
Escarificador Matic 9
Escarificador Matic 11
Escarificador Matic 13
Escarificador Matic 15
Scarifier Matic 15
DESIGNED TO DISCOMPACT THE SOIL SUPERFICIALLY.
The Matic Scarifier works at an average depth of 25 cm, breaking up the compacted soil layer without disturbing it, keeping most of the plant residues on the surface and improving the porosity and water infiltration.
Differentials
It has a safety arm system that disarms the flat spring when it meets the correct resistance, thus ensuring a straightness in the work performed, automatic spring reset by hydraulic lifting.
20 inch cutting disk in front of each arm.
Rollers equipped with bearings in oil bath.
Technical Specifications
Coupling System |
|
Traction bar |
|
Minimum power required |
|
12-15 HP/arm 1 |
|
Number of arms |
|
15 |
|
Distance between arms |
|
300 mm |
|
Working width |
|
4.500 mm |
|
Working depth range |
|
200 a 300 mm |
|
Free span under chassis |
|
630 mm |
|
Chassis width |
|
4.530 mm |
|
Overall width |
|
4.725 mm |
|
Working width of Clod-Breaking |
|
4.525 mm |
|
Overall width of the Clod-Breaking Roller |
|
4.583 mm |
|
Total length without Clod-Breaking Roller |
|
4.770 mm |
|
Total length with Clod-Breaking Roller |
|
5.514 mm |
|
Height |
|
1.560 mm |
|
Wheelset Tire |
|
RA 28 10.5/65-16 10 CANVAS |
|
Wheelset gauge |
|
4.330 mm |
|
Approximate weight |
|
3.950 kg |
|
Theoretical operational yield |
|
1,80 to 2,70 ha/h 2 |
|
1 - The required power is related to factors such as scarification depth and the compaction level and soil moisture. | |||
---|---|---|---|
2 - Tractor displacement from 4 to 6 km/h. |
Working depth
Its regulation is made through the articulation of the wheelset and the tractor's hydraulic system. The width of the depth is determined by the stop screw in the regulation mechanism, this allows the rod of the hydraulic cylinder to be fully retracted when the scarifier is working.
Scarifier arm
It is a tool that breaks up the compacted layer of the soil without causing excessive revolving, keeping a large part of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just suspend the scarifier, making the maintenance of the system a simple operation and, consequently, obtaining greater yield and lower operating costs.
Arm tip
It has a specific geometry for the scarification work, and is made of cast steel with a special alloy and heat treatment that gives it high resistance to wear by abrasion.
Cutting disk
20" plain, individual and located immediately in front of each arm.
It offers better cutting conditions of the crop remains, avoids clogging in the arm and has vertical regulation through a sliding bearing and of easy regulation, with double helical springs, which allows the disc to follow the ground undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.
Clod-Breaking Roller
It follows the topography of the land, reducing the size of the clods and leveling the surface of the scarified area. It is equipped with bearings in oil-bath, articulated supports, and helical springs to ensure the stability of the set.