Designed to support the torsions provided by ridges and undulating soil topography, validated by experimental tests to ensure greater reliability and performance.

The limitation of the seeding depth is done through double cast iron rims, aligned in the center of the furrower axle. Of quick adjustment, they allow the regulation of the seed depth from 20 to 80 millimeters without changing pieces, following the wear of the disks.

The compactors for Rice Seeder version are supplied in two models (angular "V" or convex), both made of cast iron to ensure the best performance in closing the furrow.

SPJ has a system of quick and practical adjustments of line spring pressure, depth limiters, and a dosing system, without the need to use tools.

With 500-millimeter displacement, SPJ stands out for its wide range of line articulation. Being of pantographic model, aligned to the wheels, they copy level curves and soil irregularities with uniformity.

The Seeder is equipped with TOPlanting fertilizer metering units, with double worm threads of 1"1/4, rotating in opposite directions, reducing pulsation independent of the machine inclination, always distributing the same amount of fertilizer. This model, feeding equally all the plants.

Being the main differential of SPJ, the seed deposit is made ahead of the fertilizer. With this, conformity of the seeded height and uniformity of germination are guaranteed. The distribution is carried out by a fluted, carbon steel rotor.

SPJ, in the Rice Seeder version, is equipped with a double disk furrower, a 15.5" and a 16" disk.

Made of stainless steel of large capacity and equipped with an internal movable partition that allows to interpose different dosages for seed and fertilizer, adjusting to the autonomy of the machine.

Also available in the SEED only version (Optional).

Single covers per section and retractable, with larger opening for easier filling.

SPJ was developed aiming at low periodic maintenance and machine stoppage during harvest. To provide this, in all joints, the greased points were removed and replaced by self-lubricating bushings. In hubs that had simple bearings, they were replaced by shielded bearings, increasing the useful life of the components and reducing the downtime for lubrication.

By gears, of easy handling and fast dosage regulation. Variable rate (optional).

Driven by hydraulic cylinders with safety valves, preventing the equipment from falling suddenly due to system failure.

The Rice Seeder version is supplied with tire model R2 - 500/70 R24, providing traction for the transmission even in more clayey terrain, besides not damaging the ridges when transposing them.

Designed to support the torsions provided by ridges and undulating soil topography, validated by experimental tests to ensure greater reliability and performance.

The limitation of the seeding depth is done through double cast iron rims, aligned in the center of the furrower axle. Of quick adjustment, they allow the regulation of the seed depth from 20 to 80 millimeters without changing pieces, following the wear of the disks.

The compactors for Rice Seeder version are supplied in two models (angular "V" or convex), both made of cast iron to ensure the best performance in closing the furrow.

SPJ has a system of quick and practical adjustments of line spring pressure, depth limiters, and a dosing system, without the need to use tools.

With 500-millimeter displacement, SPJ stands out for its wide range of line articulation. Being of pantographic model, aligned to the wheels, they copy level curves and soil irregularities with uniformity.

The Seeder is equipped with TOPlanting fertilizer metering units, with double worm threads of 1"1/4, rotating in opposite directions, reducing pulsation independent of the machine inclination, always distributing the same amount of fertilizer. This model, feeding equally all the plants.

Being the main differential of SPJ, the seed deposit is made ahead of the fertilizer. With this, conformity of the seeded height and uniformity of germination are guaranteed. The distribution is carried out by a fluted, carbon steel rotor.

SPJ, in the Rice Seeder version, is equipped with a double disk furrower, a 15.5" and a 16" disk.

Made of stainless steel of large capacity and equipped with an internal movable partition that allows to interpose different dosages for seed and fertilizer, adjusting to the autonomy of the machine.

Also available in the SEED only version (Optional).

Single covers per section and retractable, with larger opening for easier filling.

SPJ was developed aiming at low periodic maintenance and machine stoppage during harvest. To provide this, in all joints, the greased points were removed and replaced by self-lubricating bushings. In hubs that had simple bearings, they were replaced by shielded bearings, increasing the useful life of the components and reducing the downtime for lubrication.

By gears, of easy handling and fast dosage regulation. Variable rate (optional).

Driven by hydraulic cylinders with safety valves, preventing the equipment from falling suddenly due to system failure.

The Rice Seeder version is supplied with tire model R2 - 500/70 R24, providing traction for the transmission even in more clayey terrain, besides not damaging the ridges when transposing them.

Designed to support the torsions provided by ridges and undulating soil topography, validated by experimental tests to ensure greater reliability and performance.

The limitation of the seeding depth is done through double cast iron rims, aligned in the center of the furrower axle. Of quick adjustment, they allow the regulation of the seed depth from 20 to 80 millimeters without changing pieces, following the wear of the disks.

The compactors for Rice Seeder version are supplied in two models (angular "V" or convex), both made of cast iron to ensure the best performance in closing the furrow.

SPJ has a system of quick and practical adjustments of line spring pressure, depth limiters, and a dosing system, without the need to use tools.

With 500-millimeter displacement, SPJ stands out for its wide range of line articulation. Being of pantographic model, aligned to the wheels, they copy level curves and soil irregularities with uniformity.

The Seeder is equipped with TOPlanting fertilizer metering units, with double worm threads of 22 mm, rotating in opposite directions, reducing pulsation independent of the machine inclination, always distributing the same amount of fertilizer. This model, feeding equally all the plants

Being the main differential of SPJ, the seed deposit is made ahead of the fertilizer. With this, conformity of the seeded height and uniformity of germination are guaranteed. The distribution is carried out by a fluted, carbon steel rotor.

SPJ, in the Rice Seeder version, is equipped with a double disk furrower, a 15.5" and a 16" disk

Made of stainless steel of large capacity and equipped with an internal movable partition that allows to interpose different dosages for seed and fertilizer, adjusting to the autonomy of the machine.

Also available in the SEED only version (Optional).

Single covers per section and retractable, with larger opening for easier filling.

SPJ was developed aiming at low periodic maintenance and machine stoppage during harvest. To provide this, in all joints, the greased points were removed and replaced by self-lubricating bushings. In hubs that had simple bearings, they were replaced by shielded bearings, increasing the useful life of the components and reducing the downtime for lubrication.

By gears, of easy handling and fast dosage regulation. Variable rate (optional).

Driven by hydraulic cylinders with safety valves, preventing the equipment from falling suddenly due to system failure.

The Rice Seeder version is supplied with tire model R2 - 500/70 R24, providing traction for the transmission even in more clayey terrain, besides not damaging the ridges when transposing them.

Designed to support the torsions provided by ridges and undulating soil topography, validated by experimental tests to ensure greater reliability and performance.

The limitation of the seeding depth is done through double cast iron rims, aligned in the center of the furrower axle. Of quick adjustment, they allow the regulation of the seed depth from 20 to 80 millimeters without changing pieces, following the wear of the disks.

The compactors for Rice Seeder version are supplied in two models (angular "V" or convex), both made of cast iron to ensure the best performance in closing the furrow.

SPJ has a system of quick and practical adjustments of line spring pressure, depth limiters, and a dosing system, without the need to use tools.

With 500-millimeter displacement, SPJ stands out for its wide range of line articulation. Being of pantographic model, aligned to the wheels, they copy level curves and soil irregularities with uniformity.

The Rice Seeder is equipped with TOPlanting fertilizer metering units, with double worm threads of 22 mm, rotating in opposite directions, reducing pulsation independent of the machine inclination, always distributing the same amount of fertilizer. This model, feeding equally all the plants

Being the main differential of SPJ, the seed deposit is made ahead of the fertilizer. With this, conformity of the seeded height and uniformity of germination are guaranteed. The distribution is carried out by a fluted, carbon steel rotor.

SPJ, in the Rice Seeder version, is equipped with a double disk furrower, a 15.5" and a 16" disk

Made of stainless steel of large capacity and equipped with an internal movable partition that allows to interpose different dosages for seed and fertilizer, adjusting to the autonomy of the machine.

Also available in the SEED only version (Optional).

Single covers per section and retractable, with larger opening for easier filling.

SPJ was developed aiming at low periodic maintenance and machine stoppage during harvest. To provide this, in all joints, the greased points were removed and replaced by self-lubricating bushings. In hubs that had simple bearings, they were replaced by shielded bearings, increasing the useful life of the components and reducing the downtime for lubrication.

By gears, of easy handling and fast dosage regulation. Variable rate (optional).

Driven by hydraulic cylinders with safety valves, preventing the equipment from falling suddenly due to system failure.

The Rice Seeder version is supplied with tire model R2 - 500/70 R24, providing traction for the transmission even in more clayey terrain, besides not damaging the ridges when transposing them.