Conjunto para la alimentación de los discos de distribución tipo "casete", compuesto por una estructura totalmente de acero inoxidable, banda transversal y dispositivo de estiramiento.

Cinta transportadora eslabonada más robusta con barras transversales sobredimensionadas, pasadores de remache y cadena de mariposa. Proporciona una mayor capacidad de flujo, menor estiramiento y tasas de mantenimiento en comparación con la transportadora eslabonada transversal convencional utilizada en otros distribuidores.

Deflector de protección de la cinta, situado en la parte interna del depósito, dispuesto transversalmente a la cinta transportadora. Se puede montar a diferentes alturas que determinan el tamaño de la apertura y el paso del producto.

Conjunto para la alimentación de los discos de distribución, tipo "casete", compuesto por una estructura porta bobinas, cinta transportadora de goma y dispositivo de autocentrado.

Cinta transportadora de goma modelo "extra abrasión", fabricada con lona de nylon y empalme vulcanizado de fábrica.

Deflector de protección de la cinta, situado en la parte interna del depósito, dispuesto transversalmente a la cinta transportadora. Se puede montar a diferentes alturas que determinan el tamaño de la apertura y el paso del producto.

Conjunto para la alimentación de los discos de distribución, tipo "casete", compuesto por una estructura portadora de rodillos totalmente de acero inoxidable, cinta transportadora de goma y dispositivo de autocentrado de acero inoxidable.

Cinta transportadora de goma modelo "extra abrasión", fabricada con lona de nylon y empalme vulcanizado de fábrica.

Deflector de protección de la cinta, situado en la parte interna del depósito, dispuesto transversalmente a la cinta transportadora. Se puede montar a diferentes alturas que determinan el tamaño de la apertura y el paso del producto.

Sistema de transmisión de velocidad al transportador lateral a través de un motor hidráulico equipado con engranajes y cadenas de rodillos simples que permiten cuatro combinaciones diferentes.

Caja de engranajes de tornillo sin fin en baño de aceite con sistema de brida atornillada al eje de accionamiento de la cinta transportadora, es decir, sin perno fusible.

El flujo de aceite al motor se controla mediante un bloque de control acoplado.

El sistema de distribución consta de dos discos de distribución de chapa de acero inoxidable, con cuatro paletas en cada disco, que contienen cinco opciones de ajuste angular.

Los discos tienen un diseño de paletas con dos longitudes y dos combinaciones de montaje recomendadas.

Distribución de abonos granulados y similares: Dos paletas mayores y dos paletas menores en cada disco, dispuestas de forma alternada

Distribución de productos en polvo y similares: Cuatro paletas menores en cada disco.

Paleta de acero al carbono con tratamiento superficial y térmico.

Tapa trasera abatible para inspeccionar la salida del producto y facilitar el cambio de las tolvas.

Dos modelos de tolvas de deposición (estándar), con sistema de cambio rápido, de chapa de acero inoxidable para uso específico en la distribución de fertilizantes granulados, productos en polvo y similares.

Una tolva colectora, con sistema de cambio rápido, para realizar la prueba de flujo.

Cortina de dispersión (soporte con cadenas de eslabones sobre la tolva de deposición.

Los discos de distribución son accionados por un modelo de motor hidráulico acoplado a la caja de transmisión.

El flujo de aceite al motor se controla mediante un bloque de control acoplado.

Caja de transmisión con giro libre con lubricación por baño de aceite

Rodado delantero tipo balancín con barras de dirección y cojinetes de pivote con casquillos de bronce, rodado trasero fijo.

Escalera de acceso al Lancer, situada en su lateral. Dispone de un sistema de articulación (doblado) para aumentar el vano libre durante los trabajos de distribución.

Materiales en contacto con el producto a distribuir, fabricados en acero inoxidable, como, por ejemplo, los discos de distribución, la protección trasera contra el lanzamiento de discos, la tapa trasera y las tolvas de deposición.

Depósito de acero inoxidable, desmontable, atornillado con refuerzos laterales al chasis.

Acoplamiento del cabezal a la barra de tracción del tractor con rótula. También cuenta con un sistema de cadenas para evitar accidentes causados por el desacoplamiento involuntario del Lancer de la barra de tracción del tractor.

Feeding set of the distribution discs, "cassette" type, composed of a roller carrier structure, rubber belt and self-centering device.

Rubber belt, "extra abrasion" model, consisting of nylon pads and factory vulcanized splice.

Belt deflector protector, located on the inner part of the tank, arranged transversally to the belt displacement. It allows mounting them at different heights that determine the size of the opening and the product passage.

Feeding set of the distribution discs, "cassette" type, composed of a roller carrier structure, rubber belt and self-centering device.

Rubber belt, "extra abrasion" model, consisting of nylon pads and factory vulcanized splice.

Belt deflector protector, located on the inner part of the tank, arranged transversally to the belt displacement. It allows mounting them at different heights that determine the size of the opening and the product passage.

The distribution system is composed of two distribution discs made of stainless steel plate, with four vanes on each disc, containing five angular adjustment options.

The disks have a vane model with two lengths and two recommended assembly combinations.

Distribution of granulated and similar fertilizers: Two major and two minor vanes on each disc, alternately arranged.

Distribution of powdered and similar products: Four smaller vanes on each disc.

Vane made of carbon steel with surface and heat treatment.

Hinged rear cover to inspect the product output and facilitate changing the hoppers.

Two models of deposition hoppers (standard), with quick-change system, made of stainless steel plate for specific use in the distribution of granulated fertilizers, powder products, and similar.

A collecting hopper, with quick-change system, to perform flow tests.

Dispersion curtain (support with link chains over the deposition hopper).

Rear protection against throwing from the distribution disks.

The distribution discs are driven by a model hydraulic motor coupled to the transmission box.

The oil flow to the motor is controlled by a conjugated control block.

Transmission box with free spin in an oil bath.

Rocker arm type front wheelset with steering bars and joint bearings with bronze bushings, fixed rear wheels.

Header Coupling to the tractor traction bar with ball joint. It also has a chain system to prevent accidents due to the Lancer's uncoupling caused by unintentional uncoupling of the Lancer from the tractor traction bar.

Feeding set of the distribution discs, "cassette" type, composed of a roller carrier structure, rubber belt and self-centering device.

Rubber belt, "extra abrasion" model, consisting of nylon pads and factory vulcanized splice.

Belt deflector protector, located on the inner part of the tank, arranged transversally to the belt displacement. It allows mounting them at different heights that determine the size of the opening and the product passage.

Central and lateral belt speed transmission system, equipped with splined shafts with gears and single roller chains that allow five different combinations.

Reducer type crown and worm shaft in oil bath, with flange system screwed on the belt drive shaft, that is, without fuse pin.

The distribution system is composed of two distribution discs made of stainless steel plate, with four vanes on each disc, containing five angular adjustment options.

The disks have a vane model with two lengths and two recommended assembly combinations.

Distribution of granulated and similar fertilizers: Two major and two minor vanes on each disc, alternately arranged.

Distribution of powdered and similar products: Four smaller vanes on each disc.

Vane made of carbon steel with surface and heat treatment.

Hinged rear cover to inspect the product output and facilitate changing the hoppers.

Two models of deposition hoppers (standard), with quick-change system, made of stainless steel plate for specific use in the distribution of granulated fertilizers, powder products, and similar.

A collecting hopper, with quick-change system, to perform flow tests.

Dispersion curtain (support with link chains over the deposition hopper).

The drive of the distribution discs is done through a transmission with splined shafts, for the coupling of the cardans and gears, that is, without pins and/or keys.

Transmission box with free spin in an oil bath.

Dismountable tandem axle and set.

Tandem fixed by screws and nuts with organometallic treatment, with lateral articulation and vertical angularity limiting stop.

Adjustable wheelset gauge through of lateral displacement of the tandem set.

Access ladder to the Lancer, located on its side. It has an articulation system (folding) to increase the free span during the distribution work.

Materials in contact with the product to be distributed, made of stainless steel, such as, for example, the distribution disks, the rear protector against throwing of the disks, the rear cover and the deposit hoppers.

Deposit made of removable stainless steel, bolted with the lateral reinforcements to the chassis.

Coupling of the header to the tractor traction bar with ball joint. It also has a chain system to prevent accidents resulting from the Lancer's uncoupling and warping caused by the unintentional uncoupling of the Lancer from the tractor's traction bar.

Feeding set of the distribution discs, "cassette" type, composed of a roller carrier structure, rubber belt and self-centering device.

Rubber belt, "extra abrasion" model, consisting of nylon pads and factory vulcanized splice.

Belt deflector protector, located on the inner part of the tank, arranged transversally to the belt displacement. It allows mounting them at different heights that determine the size of the opening and the product passage.

Speed transmission system to the side belt through a hydraulic motor equipped with gears and simple roller chains that allow three different combinations.

Reducer type crown and worm shaft in oil bath, with flange system screwed on the belt drive shaft, that is, without fuse pin.

The oil flow to the motor is controlled by a conjugated control block.

The distribution system is composed of two distribution discs made of stainless steel plate, with four vanes on each disc, containing five angular adjustment options.

The disks have a vane model with two lengths and two recommended assembly combinations.

Distribution of granulated and similar fertilizers: Two major and two minor vanes on each disc, alternately arranged.

Distribution of powdered and similar products: Four smaller vanes on each disc.

Vane made of carbon steel with surface and heat treatment.

Hinged rear cover to inspect the product output and facilitate changing the hoppers.

Two models of deposition hoppers (standard), with quick-change system, made of stainless steel plate for specific use in the distribution of granulated fertilizers, powder products, and similar.

A collecting hopper, with quick-change system, to perform flow tests.

Dispersion curtain (support with link chains over the deposition hopper).

The oil flow to the hydraulic motor is controlled by a mating control block.

The oil flow to the motor is controlled by a conjugated control block.

Transmission box with free spin in an oil bath.

Dismountable tandem axle and set.

Adjustable wheelset gauge through of lateral displacement of the tandem set, with locking.

Access ladder to the Lancer, located on its side. It has an articulation system (folding) to increase the free span during the distribution work.

Materials in contact with the product to be distributed, made of stainless steel, such as, for example, the distribution disks, the rear protector against throwing of the disks, the rear cover and the deposit hoppers.

Deposit made of removable stainless steel, bolted with the lateral reinforcements to the chassis.

Coupling of the header to the tractor traction bar with ball joint. It also has a chain system to prevent accidents resulting from the Lancer's uncoupling and warping caused by the unintentional uncoupling of the Lancer from the tractor's traction bar.

Feeding set of the distribution discs, "cassette" type, composed of a roller carrier structure, rubber belt and self-centering device.

Rubber belt, "extra abrasion" model, consisting of nylon pads and factory vulcanized splice.

Belt deflector protector, located in the internal part of the tank, arranged longitudinally to the displacement of the belt. It allows mounting them at different heights that determine the size of the opening and the product passage.

Speed transmission system to the side belt through a hydraulic motor equipped with gears and simple roller chains that allow three different combinations.

Reducer type crown and worm shaft in oil bath, with flange system screwed on the belt drive shaft, that is, without fuse pin.

The oil flow to the motor is controlled by a conjugated control block.

The distribution system is composed of two distribution discs made of stainless steel plate, with four vanes on each disc, containing five angular adjustment options.

The disks have a vane model with two lengths and two recommended assembly combinations.

Distribution of granulated and similar fertilizers: Two major and two minor vanes on each disc, alternately arranged.

Distribution of powdered and similar products: Four smaller vanes on each disc.

Vane made of carbon steel with surface and heat treatment.

Hinged rear cover to inspect the product output and facilitate changing the hoppers.

Two models of deposition hoppers (standard), with quick-change system, made of stainless steel plate for specific use in the distribution of granulated fertilizers, powder products, and similar.

A collecting hopper, with quick-change system, to perform flow tests.

Dispersion curtain (support with link chains over the deposition hopper).

The oil flow to the hydraulic motor is controlled by a mating control block.

The oil flow to the motor is controlled by a conjugated control block.

Transmission box with free spin in an oil bath.

Dismountable tandem axle and set.

Adjustable wheelset gauge through of lateral displacement of the tandem set, with locking.

Access ladder to the Lancer, located on its side. It has an articulation system (folding) to increase the free span during the distribution work.

Materials in contact with the product to be distributed, made of stainless steel, such as, for example, the distribution disks, the rear protector against throwing of the disks, the rear cover and the deposit hoppers.

Deposit made of removable stainless steel, bolted with the lateral reinforcements to the chassis.

Coupling of the header to the tractor traction bar with ball joint. It also has a chain system to prevent accidents resulting from the Lancer's uncoupling and warping caused by the unintentional uncoupling of the Lancer from the tractor's traction bar.

Feeding set of the distribution discs, "cassette" type, composed of a roller carrier structure, rubber belt and self-centering device.

Rubber belt, "extra abrasion" model, consisting of nylon pads and factory vulcanized splice.

Belt deflector protector, located in the internal part of the tank, arranged longitudinally to the displacement of the belt. It allows mounting them at different heights that determine the size of the opening and the product passage.

Central and lateral belt speed transmission system, equipped with splined shafts with gears and single roller chains that allow five different combinations.

Reducer type crown and worm shaft in oil bath, with flange system screwed on the belt drive shaft, that is, without fuse pin.

The distribution system is composed of two distribution discs made of stainless steel plate, with four vanes on each disc, containing five angular adjustment options.

The disks have a vane model with two lengths and two recommended assembly combinations.

Distribution of granulated and similar fertilizers: Two major and two minor vanes on each disc, alternately arranged.

Distribution of powdered and similar products: Four smaller vanes on each disc.

Vane made of carbon steel with surface and heat treatment.

Hinged rear cover to inspect the product output and facilitate changing the hoppers.

Two models of deposition hoppers (standard), with quick-change system, made of stainless steel plate for specific use in the distribution of granulated fertilizers, powder products, and similar.

A collecting hopper, with quick-change system, to perform flow tests.

Dispersion curtain (support with link chains over the deposition hopper).

The drive of the distribution discs is done through a transmission with splined shafts, for the coupling of the cardans and gears, that is, without pins and/or keys.

Transmission box with free spin in an oil bath.

Dismountable tandem axle and set.

Tandem fixed by screws and nuts with organometallic treatment, with lateral articulation and vertical angularity limiting stop.

Adjustable wheelset gauge through of lateral displacement of the tandem set.

Access ladder to the Lancer, located on its side. It has an articulation system (folding) to increase the free span during the distribution work.

Materials in contact with the product to be distributed, made of stainless steel, such as, for example, the distribution disks, the rear protector against throwing of the disks, the rear cover and the deposit hoppers.

Deposit made of removable stainless steel, bolted with the lateral reinforcements to the chassis.

Coupling of the header to the tractor traction bar with ball joint. It also has a chain system to prevent accidents resulting from the Lancer's uncoupling and warping caused by the unintentional uncoupling of the Lancer from the tractor's traction bar.

Feeding set of the distribution discs, "cassette" type, composed of a roller carrier structure, rubber belt and self-centering device.

Rubber belt, "extra abrasion" model, consisting of nylon pads and factory vulcanized splice.

Belt deflector protector, located in the internal part of the tank, arranged longitudinally to the displacement of the belt. It allows mounting them at different heights that determine the size of the opening and the product passage.

The belt is driven by an auxiliary wheel located on the front tire of the tandem.

The system is also composed of an oil bath transmission box, a rolling bearing, two cardan shafts with protection consisting of quick coupling terminals and a gearbox with two speed options (gears).

The coupling of the gearbox to the belt's rear axle is made through two bolted flanges with three fusible screws that have the function of protecting the belt.

The distribution system is composed of two distribution discs made of stainless steel plate, with four vanes on each disc, containing five angular adjustment options.

The disks have a vane model with two lengths and two recommended assembly combinations.

Distribution of granulated and similar fertilizers: Two major and two minor vanes on each disc, alternately arranged.

Distribution of powdered and similar products: Four smaller vanes on each disc.

Vane made of carbon steel with surface and heat treatment.

Hinged rear cover to inspect the product output and facilitate changing the hoppers.

Two models of deposition hoppers (standard), with quick-change system, made of stainless steel plate for specific use in the distribution of granulated fertilizers, powder products, and similar.

A collecting hopper, with quick-change system, to perform flow tests.

Dispersion curtain (support with link chains over the deposition hopper)

Rear protection against throwing from the distribution disks.

The distribution discs are driven by a model hydraulic motor coupled to the transmission box.

The oil flow to the engine is controlled by a conjugated control block.

Transmission box with free spin in an oil bath.

Dismountable tandem axle and set.

Tandem fixed by screws and nuts with organometallic treatment, with lateral articulation and vertical angularity limiting stop.

Access ladder to the Lancer, located on its side. It has an articulation system (folding) to increase the free span during the distribution work.

Materials in contact with the product to be distributed, made of stainless steel, such as, for example, the distribution disks, the rear protector against throwing of the disks, the rear cover and the deposit hoppers.

Deposit made of removable stainless steel, bolted with the lateral reinforcements to the chassis.

Coupling of the header to the tractor traction bar with ball joint. It also has a chain system to prevent accidents resulting from the Lancer's uncoupling and warping caused by the unintentional uncoupling of the Lancer from the tractor's traction bar.

Feeding set of the distribution discs, "cassette" type, composed of a roller carrier structure, rubber belt and self-centering device.

Rubber belt, "extra abrasion" model, consisting of nylon pads and factory vulcanized splice.

Belt deflector protector, located in the internal part of the tank, arranged longitudinally to the displacement of the belt. It allows mounting them at different heights that determine the size of the opening and the product passage.

The belt is driven by an auxiliary wheel located on the front tire of the tandem.

The system is also composed of an oil bath transmission box, a rolling bearing, two cardan shafts with protection consisting of quick coupling terminals and a gearbox with two speed options (gears).

The coupling of the gearbox to the belt's rear axle is made through two bolted flanges with three fusible screws that have the function of protecting the belt.

The distribution system is composed of two distribution discs made of stainless steel plate, with four vanes on each disc, containing five angular adjustment options.

The distribution system is composed of two distribution discs made of stainless steel plate, with four vanes on each disc, containing five angular adjustment options.

The disks have a vane model with two lengths and two recommended assembly combinations.

Distribution of granulated and similar fertilizers: Two major and two minor vanes on each disc, alternately arranged.

Distribution of powdered and similar products: Four smaller vanes on each disc.

Vane made of carbon steel with surface and heat treatment.

Hinged rear cover to inspect the product output and facilitate changing the hoppers.

Two models of deposition hoppers (standard), with quick-change system, made of stainless steel plate for specific use in the distribution of granulated fertilizers, powder products, and similar.

A collecting hopper, with quick-change system, to perform flow tests.

Dispersion curtain (support with link chains over the deposition hopper).

Rear protection against throwing from the distribution disks.

The drive of the distribution discs is done through a transmission with splined shafts, for the coupling of the cardans and gears, that is, without pins and/or keys.

Transmission box with free spin in an oil bath.

Dismountable tandem axle and set.

Tandem fixed by screws and nuts with organometallic treatment, with lateral articulation and vertical angularity limiting stop.

Access ladder to the Lancer, located on its side. It has an articulation system (folding) to increase the free span during the distribution work.

Materials in contact with the product to be distributed, made of stainless steel, such as, for example, the distribution disks, the rear protector against throwing of the disks, the rear cover and the deposit hoppers.

Deposit made of removable stainless steel, bolted with the lateral reinforcements to the chassis.

Acoplamiento del cabezal con la rótula a la barra de tracción del tractor. También cuenta con un sistema de cadenas para evitar accidentes provenientes del desacople y empinado del Lancer causados por el desacoplamiento involuntario del Lancer de la barra de tracción del tractor.

Feeding set of the distribution discs, "cassette" type, composed of a roller carrier structure, rubber belt and self-centering device.

Rubber belt, "extra abrasion" model, consisting of nylon pads and factory vulcanized splice.

Feeding set of the distribution discs "cassette" type, consisting of a fully stainless steel structure, cross belt and a stretching device.

A more robust cross belt, made with larger crossbars, rivet pins, and "wing" model chain, with larger dimension. Provides higher flow capacity, lower stretching and maintenance rates, when compared to the conventional cross-belt model used in other distributors.

The "cassette" type distribution discs feeding set is composed of a stainless steel roller carrier structure, a rubber belt, and a stainless steel self-centering device.

Rubber belt, "extra abrasion" model, consisting of nylon pads and factory vulcanized splice.

Speed transmission system to the side belt through a hydraulic motor equipped with gears and simple roller chains that allow four different combinations.

Reducer type crown and worm shaft in oil bath, with flange system screwed on the belt drive shaft, that is, without fuse pin.

The oil flow to the motor is controlled by a conjugated control block.

The distribution system is composed of two distribution discs made of stainless steel plate, with four vanes on each disc, containing five angular adjustment options.

The disks have a vane model with two lengths and two recommended assembly combinations.

Distribution of granulated and similar fertilizers: Two major and two minor vanes on each disc, alternately arranged.

Distribution of powdered and similar products: Four smaller vanes on each disc.

Vane made of carbon steel with surface and heat treatment.

Hinged rear cover to inspect the product output and facilitate changing the hoppers.

Two models of deposition hoppers (standard), with quick-change system, made of stainless steel plate for specific use in the distribution of granulated fertilizers, powder products, and similar.

A collecting hopper, with quick-change system, to perform flow tests.

Dispersion curtain (support with link chains over the deposition hopper).

The distribution discs are driven by a model hydraulic motor coupled to the transmission box.

The oil flow to the motor is controlled by a conjugated control block.

Transmission box with free spin in an oil bath.

Rocker arm type front wheelset with steering bars and joint bearings with bronze bushings, fixed rear wheels.

Access ladder to the Lancer, located on its side. It has an articulation system (folding) to increase the free span during the distribution work.

Materials in contact with the product to be distributed, made of stainless steel, such as, for example, the distribution disks, the rear protector against throwing of the disks, the rear cover and the deposit hoppers.

Chassis and structure also made of stainless steel, resulting in greater resistance to corrosion and consequently increasing the durability of the components.

Header Coupling to the tractor traction bar with ball joint. It also has a chain system to prevent accidents due to the Lancer's uncoupling caused by unintentional uncoupling of the Lancer from the tractor traction bar.

Feeding set of the distribution discs, "cassette" type, composed of a roller carrier structure, rubber belt and self-centering device.

Rubber belt, "extra abrasion" model, consisting of nylon pads and factory vulcanized splice.

Belt deflector protector, located on the inner part of the tank, arranged transversally to the belt displacement. It allows mounting them at different heights that determine the size of the opening and the product passage.

Speed transmission system to the side belt through a hydraulic motor equipped with gears and simple roller chains that allow four different combinations.

Reducer type crown and worm shaft in oil bath, with flange system screwed on the belt drive shaft, that is, without fuse pin.

The oil flow to the motor is controlled by a conjugated control block.

Distribution system through an endless screw that provides a uniform profile throughout its application width, with no need for overlapping

Equalization of the product flow, carried out by means of metering rulers, millimetrically actuated by handles.

It has a hydraulic articulation system of the troughs to be retracted during transport, facilitating access to places with reduced widths and making transport easier. This articulation system is performed by a radio system activated by remote control, making the operation simple and agile.

Hydraulically driven, using the double pump already installed in the Lancer, the flow that used to feed the motor of the distribution discs now feeds a second hydraulic block, which manages the drive of cylinders and hydraulic motors, responsible for driving the screw conveyor of the Linea.

The distribution system is composed of two distribution discs made of stainless steel plate, with four vanes on each disc, containing five angular adjustment options.

The disks have a vane model with two lengths and two recommended assembly combinations.

Distribution of granulated and similar fertilizers: Two major and two minor vanes on each disc, alternately arranged.

Distribution of powdered and similar products: Four smaller vanes on each disc.

Vane made of carbon steel with surface and heat treatment.

Hinged rear cover to inspect the product output and facilitate changing the hoppers.

Two models of deposition hoppers (standard), with quick-change system, made of stainless steel plate for specific use in the distribution of granulated fertilizers, powder products, and similar.

A collecting hopper, with quick-change system, to perform flow tests.

Dispersion curtain (support with link chains over the deposition hopper).

The distribution discs are driven by a model hydraulic motor coupled to the transmission box.

The oil flow to the motor is controlled by a conjugated control block.

Transmission box with free spin in an oil bath.

Directional front wheelset with Rala system.

Fixed rear wheelset.

High-flotation tires 710/40x22,5.

Access ladder to the Lancer, located on its side. It has an articulation system (folding) to increase the free span during the distribution work.

Materials in contact with the product to be distributed, made of stainless steel, such as, for example, the distribution disks, the rear protector against throwing of the disks, the rear cover and the deposit hoppers.

Deposit made of removable stainless steel, bolted with the lateral reinforcements to the chassis.

Header Coupling to the tractor traction bar with ball joint. It also has a chain system to prevent accidents due to the Lancer's uncoupling caused by unintentional uncoupling of the Lancer from the tractor traction bar.