Representantes
Jumbo Matic Buster Hydraulic 4/4
Jumbo Matic Buster Hydraulic 6/6
Jumbo Matic Buster 7/5
Jumbo Matic Buster 9/7
Jumbo Matic Buster 11/9
Jumbo Matic Buster Hydraulic 6/6
The JUMBO MATIC BUSTER HYDRAULIC is a product destined to break the compacted soil layer without causing excessive revolving, keeping most of the plant residues on the surface, improving the porosity and the water infiltration.
The JUMBO MATIC BUSTER HYDRAULIC is an implement for coupling to the tractor traction bar, composed of three sections: cutting disks, arms and clod-Breaking rollers.
Differentials
It has an arm safety system that disarms the flat spring when it meets the correct resistance, thus ensuring straightness in the work performed, automatic spring reset by hydraulic lifting.
Cutting disk of 20 inches in front of each arm.
Rollers equipped with bearings in oil.
Technical Specifications
|
Coupling System |
|
Three points |
|
|
Minimum power required (HP) |
|
30 HP/arm 1 |
|
|
Quantity of arms |
|
6 arms with 600 mm spacing |
|
|
Diameter of the cutting discs (inches) |
|
22” |
|
|
Working width |
|
3.600 mm |
|
|
Working depth range |
|
200 a 500 mm |
|
|
Free span under chassis |
|
710 mm |
|
|
Width of the chassis |
|
3.750 mm |
|
|
Working width of Clod-Breaking roller |
|
3.334 mm |
|
|
Total length without Clod-Breaking roller |
|
2.230 mm |
|
|
Total length with of Clod-Breaking roller |
|
2.540 mm |
|
|
Height |
|
1.390 mm |
|
|
Wheelset Tire |
|
RIB IMPLEM. RA45 7.50-16 10 CANVAS |
|
|
Wheelset gauge |
|
3.830 mm |
|
|
Approximate weight |
|
1.970 Kg |
|
|
Theoretical operational yield (ha/h) |
|
1,44 a 2,16 2 |
|
| 1 - The required power is related to factors such as the depth of subsoiling and the compaction level and soil moisture. | |||
|---|---|---|---|
| 2 - Tractor displacement from 4 to 6 km/h | |||
Working depth
Work depth adjustment through articulation of the wheels, driven by threaded rods and ratchet.
Subsoiling arm
The subsoiling arm is a tool that breaks up the compacted soil layer without causing excessive revolving, keeping most of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just lift the subsoiler, making the maintenance of the system a simple operation and consequently obtaining greater yield and lower operating cost.
Arm End
It has a specific geometry for subsoiling work, it is made of cast steel with a special alloy and thermal treatment that gives it high resistance to abrasion.
Cutting Disk
22" plain, individual and located immediately in front of each arm. It offers better cutting conditions of the crop remains, avoids clogging in the arm and has vertical regulation through a sliding bearing and of easy regulation, with double helical springs, which allows the disc to follow the ground undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.
Clod-Breaking Roller
It follows the topography of the land, reducing the size of the clods and leveling the surface of the worked area. It is equipped with bearings in oil-bath, articulated supports, and helical springs to ensure the stability of the set.
