Main textured polyethylene (L): 3.000.

Clean water textured polyethylene (L): 250.

Application width (m): 30.

Nozzle spacing (mm): 500.

Automatic section cut: 7.

Nitrogen accumulator damping system.

Auxiliary lighting for night spraying.

Rotating cylinders with brake which reduces the speed at the end of stroke.

Working bar height (m):

• Minimum: 0.6.
• Maximum: 2.42.

Control valves panel for spraying, incorporation and supply.

Spraying Pumps: Hypro Centrifugal 800 L/min - driven by hydraulic motor.

Flow control: PWM realized in BoschRexroth hydraulic piston pump.

Spray Control:

Electronic 7 sections.

KZ two-way ball valve with 2" flanged connection.

257 l/min, display indicating open or closed position.

0.8 second actuation.

High/low flow control valve: Manual valve, to perform the work adjustment with flow rates below 100 l/ha.

Spray tips: Teejet.

Nozzle holder: Hypro (3-way).

On-board computer: Smart Jan controller.

By centrifugal pump with hydraulic drive, 750/lpm refilling capacity.

Suction height 7.62 m/25 ft.

With incorporator - 30 L capacity in polyethylene.

Hydraulic driven by electrovalves.

MWM SERIES 12 - 4.12 TCE MAR - I 190CV@2.200rpm and 700Nm@1.500rpm Turbo Aftercooler.

Electronic engine that complies with the MAR-1 legislation that defines the limits of pollutant emissions.

Lower fuel consumption.

Axial Piston Transmission Pump with variable displacement with electronic control.

Wheel reducer with dynamic brake and integrated stationary brake and ramp assistant function.

The wheel reducers use ISO VG 150 lubricating oil.

Axial piston wheel motor with electric variable displacement.

Traction control: Speed and torque control at each wheel for better skid-free driving.

Charge and diesel engine rotation control: engine runs at the rotation of lowest fuel consumption, avoiding waste.

ABS and HBL: High efficiency braking with safe stopping in reduced distance.

CRUISE CONTROL: Constant speed during application regardless of topography.

ECO MODE: economical working mode that provides lower fuel consumption, longer component life, less maintenance, and improved performance.

Polyethylene fuel tank (L): 300.

Sedimentation filter with priming pump and sensor to indicate the presence of water in the fuel.

Pneumatic Circuit: With filter and air dryer.

Displacement Modes.

Transport, Work, and Maneuver.

Displacement Speed: up to 42 km/h always with the machine empty.

Maximum speeds with ECO MODE system.

Self-propelled.

Hydraulic pump model: Bosch Rexroth gear pump.

Provides the oil flow required for driving the hydrostatic steering, autopilot, gauge opening and opening of the cutting gates of the distribution disc feed.

Direction: Hydrostatic with adjustable column.

Wheelset: Radial Tire 320/90 R42.

Suspension: Independent active pneumatic.

Tie rods: With rubber bushings, fixed with bolts.

Clean tracks and fenders: Tubular.

Adjustable gauge (mm): 2.500 to 3.200.

Weld-free stringers made of high-strength steel, thus enabling greater resistance to traction, torsion, bending, and fatigue, extending the component's useful life.

Other chassis elements are built in structural steel and bolted to the stringers, allowing their exchange in case of need.

The gangways allow easy access for maintenance of the engine and hydraulic tank.

Under cushions for vibration damping.

Pressurized with ecologic digital air-conditioning and hot air.

Anatomic seat with electro-pneumatic suspension.

Left side unilateral door, panoramic windshield, door and rear tempered glass 6 mm tinted tint.

Radio with USB input.

Giroflex and 7 LED headlights, compartment for ECU's, 12 and 5 VDC sockets.

Learner's seat.

Engine front cowl: With LED headlights high and low light and internal auxiliary light.