Representantes
Jumbo Matic Buster Hydraulic 4/4
Jumbo Matic Buster Hydraulic 6/6
Jumbo Matic Buster 7/5
Jumbo Matic Buster 9/7
Jumbo Matic Buster 11/9
Jumbo Matic Buster 11/9
EFFICIENT DECOMPACTION WITH LESS SOIL DISTURBANCE.
Soil compaction restricts the root growth of plants and rainwater infiltration. On these cases, mechanical intervention with less disturbance of the soil surface layer is necessary, preserving the organic matter and ensuring water and nutrients to the plant roots.
Differentials
It has a safety system of the arm that disarms the flat spring when it meets the correct resistance, thus ensuring a straightness in the work performed, automatic spring reset by hydraulic lifting
20-inch cutting disk in front of each arm.
Rollers equipped with bearings in oil.
Technical Specifications
|
Coupling System |
|
Traction bar (with head) |
|
|
Minimum power required |
|
30 HP/arm 1 |
|
|
Quantity of arms with spacing of 600 mm |
|
9 arms |
|
|
Quantity of arms with spacing of 480 mm (optional) |
|
11 arms |
|
|
Diameter of the cutting discs (inches) |
|
22” |
|
|
Working width with 60cm spacing |
|
5,40 m |
|
|
Working width with 48 cm spacing |
|
5,20 m |
|
|
Working depth range |
|
200 a 500 mm |
|
|
Free span under chassis |
|
710 mm |
|
|
Width of the chassis |
|
5.130 mm |
|
|
Working width of Clod-Breaking roller |
|
5.385 mm |
|
|
Total length without Clod-Breaking roller |
|
5.960 mm |
|
|
Total length with of Clod-Breaking roller |
|
6.900 mm |
|
|
Height |
|
1.385 mm |
|
|
Wheelset Tire |
|
RIB IMPLEM. RA28 10.5/65-16 10 CANVAS |
|
|
Wheelset gauge |
|
2.820 mm |
|
|
Approximate weight with 9 arms |
|
4.191 kg |
|
|
Approximate weight with 11 arms |
|
4.580 kg |
|
|
Theoretical operational yield with 9 arms |
|
2,16 a 3,24 ha/h 2 |
|
|
Theoretical operational yield with 11 arms |
|
2,00 to 3,12 ha/h 2 |
|
| 1 - The required power is related to factors such as the depth of subsoiling and the compaction level and soil moisture. | |||
|---|---|---|---|
| 2 - Tractor displacement from 4 to 6 km/h. | |||
Working depth
Its regulation is made through the articulation of the wheelset and the tractor's hydraulic system. The depth amplitude is determined by the quantity of course limiter wedges, located in the shafts of the two hydraulic cylinders. Wheels with articulation through an articulating arm, controlled by a system of parallel cylinders.
Subsoiling arm
The subsoiling arm is a tool that breaks up the compacted soil layer without causing excessive revolving, keeping most of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just lift the subsoiler, making the maintenance of the system a simple operation and consequently obtaining greater yield and lower operating cost.
Arm End
It has a specific geometry for subsoiling work, it is made of cast steel with a special alloy and thermal treatment that gives it high resistance to abrasion.
Cutting Disk
22" plain, individual and located immediately in front of each arm. It offers better cutting conditions of the crop remains, avoids clogging in the arm and has vertical regulation through a sliding bearing and of easy regulation, with double helical springs, which allows the disc to follow the ground undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.
Clod-Breaking Roller
It follows the topography of the land, reducing the size of the clods and leveling the surface of the worked area. It is equipped with bearings in oil-bath, articulated supports, and helical springs to ensure the stability of the set.
Photo Gallery
