A Jan utiliza cookies e outras tecnologias semelhantes para melhorar a sua experiência, de acordo com a nossa Política de Privacidade e, ao continuar navegando, você concorda com estas condições.
-svg.svg){kind=logo}
Jumbo Matic Buster Hydraulic 4/4
Jumbo Matic Buster Hydraulic 6/6
Jumbo Matic Buster 9/7
Jumbo Matic Buster 11/9
Jumbo Matic Buster 7/5
Jumbo Matic Buster Hydraulic 4/4
Jumbo Matic Buster Hydraulic 6/6
Jumbo Matic Buster 9/7
Jumbo Matic Buster 11/9
Jumbo Matic Buster 7/5
It has a safety system of the arm that disarms the flat spring when it meets the correct resistance, thus ensuring a straightness in the work performed, automatic spring reset by hydraulic lifting.
22-inch cutting disk in front of each arm.
Rollers equipped with bearings in oil.
7 arms with spacing of 40 cm
Working width with 40cm spacing 2.80 m
| Coupling System | Traction bar (with head) |
| Minimum power required (HP) | 30 HP/arm 1 |
| Quantity of arms | 5 arms with spacing of 600 mm |
| Diameter of the cutting discs (inches) | 22 |
| Working width | with 60cm spacing 3.00m |
| Working depth range | 200 a 500 mm |
| Free span under chassis | 710 mm |
| Width of the chassis | 3.090 mm |
| Working width of Clod-Breaking roller | 3.335 mm |
| Total length without Clod-Breaking roller | 5.160 mm |
| Total length with of Clod-Breaking roller | 6.100 mm |
| Height | 1.385 mm |
| Wheelset Tire | RIB. IMPLEM.. RA45 7.50-16 10 CANVAS |
| Wheelset gauge | 2.790 mm |
| Approximate weight | with 5 arms 2328 kg / with 7 arms 2716 kg |
| Theoretical operational yield (ha/h) | 1,20 a 1,80 2 |
| observation | 1 - The required power is related to factors such as the depth of subsoiling and the compaction level and soil moisture. |
| observacao | 2 - Tractor displacement from 4 to 6 km/h |
Its regulation is made through the articulation of the wheelset and the tractor's hydraulic system The depth amplitude is determined by the quantity of course limiter wedges, located in the shafts of the two hydraulic cylinders. Wheels with articulation through an articulating arm, controlled by a system of parallel cylinders.
The subsoiling arm is a tool that breaks up the compacted soil layer without causing excessive revolving, keeping most of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just lift the subsoiler, making the maintenance of the system a simple operation and consequently obtaining greater yield and lower operating cost.
It has a specific geometry for subsoiling work, it is made of cast steel with a special alloy and thermal treatment that gives it high resistance to abrasion.
22" plain, individual and located immediately in front of each arm. It offers better cutting conditions of the crop remains, avoids clogging in the arm and has vertical regulation through a sliding bearing and of easy regulation, with double helical springs, which allows the disc to follow the ground undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.
It follows the topography of the land, reducing the size of the clods and leveling the surface of the worked area. It is equipped with bearings in oil-bath, articulated supports, and helical springs to ensure the stability of the set.
