A Jan utiliza cookies e outras tecnologias semelhantes para melhorar a sua experiência, de acordo com a nossa Política de Privacidade e, ao continuar navegando, você concorda com estas condições.
-svg.svg){kind=logo}
Jumbo Matic Buster Hydraulic 4/4
Jumbo Matic Buster Hydraulic 6/6
Jumbo Matic Buster 7/5
Jumbo Matic Buster 9/7
Jumbo Matic Buster 11/9
Jumbo Matic Buster Hydraulic 4/4
Jumbo Matic Buster Hydraulic 6/6
Jumbo Matic Buster 7/5
Jumbo Matic Buster 9/7
Jumbo Matic Buster 11/9
Features a shank safety system that releases the flat spring when it meets the correct resistance, thus ensuring straightness in the work performed, automatic spring reset by hydraulic lift.
22-inch cutting disc in front of each shank.
Rollers equipped with oil-bath bearings.
| Hitch system | Three-point |
| Minimum required power (CV) | 35 to 40 cv /shank |
| Number of shanks | 4 shanks spaced 600 mm apart |
| Cutting discs diameter (inches) | 22 |
| Working width | 2.400 mm |
| Working depth range | 200 to 500 mm |
| Chassis width | 2.550 mm |
| Working width of the clod-breaking roller | 2.200 mm |
| Total length without clod-breaker roller | 2.230 mm |
| Total length with clod-breaker roller | 2.540 mm |
| Height | 1.390 mm |
| Running gear | TIRE RIB IMPLEM. RA45 7.50-16 10 PLY |
| Wheel track width | 2.630 mm |
| Approximate weight | 1.370 Kg |
| Theoretical operational performance | 0,90 to 1,44 ha/h 2 |
| note | 1 - The required power is related to factors such as subsoiling depth and the level of soil compaction and moisture. |
| note | 2 - Tractor displacement from 4 to 6 km/h. |
Work depth adjustment through articulation of the wheels, driven by threaded rods and ratchet.
The subsoiling arm is a tool that breaks up the compacted soil layer without causing excessive revolving, keeping most of the plant residues on the surface, improving porosity and water infiltration.
It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just lift the subsoiler, making the maintenance of the system a simple operation and consequently obtaining greater yield and lower operating cost
It has a specific geometry for subsoiling work, it is made of cast steel with a special alloy and thermal treatment that gives it high resistance to abrasion.
22" plain, individual and located immediately in front of each arm. It offers better cutting conditions of the crop remains, avoids clogging in the arm and has vertical regulation through a sliding bearing and of easy regulation, with double helical springs, which allows the disc to follow the ground undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.
It follows the topography of the land, reducing the size of the clods and leveling the surface of the worked area. It is equipped with bearings in oil-bath, articulated supports, and helical springs to ensure the stability of the set.
