+55 (54) 3332-6500

Não-Me-Toque / Rio Grande do Sul


Social Media:

Idiomas: Jan em Português Jan en Español Jan in Inglish


Representantes Jan

Jumbo Matic Hidráulico 3


Developed to decompress the soil, including in direct planting areas, leaving the crop remains on the ground. It has flat spring arms with an automatic disarm system and a greater angle, requiring less tractor power.

Jumbo Matic Jan Implementos


It has an arm safety system that disarms the flat spring when it meets the correct resistance, thus ensuring straightness in the work performed, automatic spring reset by hydraulic lifting.

18'' cutting disk at the front of each arm.

Technical Specifications

Coupling system




Coupling pins


Cat. II


Required power


18 - 20 HP/arm 1


Quantity of arms




Distance between arms


530 mm


Working width


1.600 mm


Working depth range


200 to 400 mm


Free span under chassis


640 mm


Chassis width


1.295 mm


Overall width


1.760 mm


Working width of the laminar grinder roll


1.420 mm


Total width of the laminar grinder roll


1.471 mm


Total length without laminar grinder roll


1.525 mm


Overall length with laminar grinder roll


2.200 mm




1.310 mm


Approximate weight


720 kg


Theoretical operating yield


0.64 to 0.96 2


1 - The power required is related to factors such as subsoiling depth and the level of soil compaction and moisture.
2 - Tractor displacement from 4 to 6 km/h.

Working Depth

Work depth regulation through the articulation of the wheels, driven by the tractor's hydraulic system. The depth range is determined by the number of stroke limiting shims, located on the rods of the two hydraulic cylinders.

Subsoiler Arm

With parabolic geometry, the subsoiling arm is a tool that breaks up the compacted layer of soil without causing excessive revolving, keeping a large part of the plant residues on the surface, improving porosity and water infiltration. It is composed of a safety system that disarms the arm by means of a flat spring whenever it encounters any obstacle. To rearm it is automatic, just lift the subsoiler, making the maintenance of the system a simple operation and consequently obtaining greater yield and lower operating costs.

Cutting disk

18" plain, individual and located immediately in front of each arm. It offers better cutting conditions of cultural remains, avoids the arm clogging and has vertical regulation through a sliding bearing and easy regulation, with double helical springs, which allows the disc to follow the terrain undulations. Its mechanism offers greater cutting effectiveness without compromising the working depth of the arm.

Grinding Roller

It follows the topography of the land, reducing the size of the clods and leveling the surface of the worked area, with a system of articulated supports and helical springs that cause effective compression to the soil, regardless of the topography of the area.

Photo Gallery


Request a Quote

Jan, somos o compromisso com quem cultiva