Representantes
Lancer PPO 600/900
Differentials
Pendular distributor
Applies various products with different physical characteristics
Performs lateral application to either side
Optional Items
Bigger Agitator
Plate with only one hole for distribution of small forage seeds 2
Technical Specifications
|
Coupling System |
|
cat. I and II Three-point |
|
|
Capacity |
|
0,6 m³ / 0,9 m³ |
|
|
Maximum charge capacity |
|
600 Kg / 900 Kg1 |
|
|
Distribution width |
|
6 to 18 |
|
|
PTO Rotation |
|
540 rpm |
|
|
Height from the pendulum to the ground recommended during operation |
|
750 mm |
|
|
Minimum lifting capacity of the tractor hydraulic system |
|
2.000 Kgf |
|
|
Height |
|
1.200/1.400 mm |
|
|
Width |
|
1.325 mm |
|
|
Length |
|
1.860 mm |
|
|
Approximate empty weight with tires |
|
115/122 kg |
|
| 1 – The maximum recommended charge capacity is limited to the mechanical resistance of the chassis structure and especially of the tank. | |||
|---|---|---|---|
| 2 – Contains only one rhombus-shaped hole in the base. It is recommended to be mounted on the Lancer when distributing small seeds and with low application rate, such as forage seeds for example. | |||
Tank
Tank made of rotomolded polyethylene.
Distribution System
Inertial pendulum, composed of a pendulum made of Nylon, provides a uniform distribution transversal profile.
Through an operation to reduce the length of the pendulum, the product can be applied in strips, in the case of fruit farming, coffee farming and rubber plantations.
Adjustment of the place of deposition on the disk, which allows adjustment of the symmetry of the distribution transversal profile of the various types of products.
Performs the lateral application to either side in the endings near fences, for example.
Control of the dosing gate opening by means of a lever for manual operation.
Stem with graduated scale and adjustable stop, made of injected nylon that provides a precise flow.
Drive of the distribution disks
By Cardan 540 rpm.
Coupling
Three-Point Hitch – Category I and II.
