Representantes
Lancer 1.350
Lancer 1.350
MONODISC CENTRIFUGAL DISTRIBUTION FOR TRACTORS WITH LOWER POWER IN MORE COMPACT CROPS.
The LANCER 1.350 has technology to meet the demands of agriculture, distributing in widths of up to 36 meters, providing a uniform distribution profile, for various types of top dressing fertilizers, pre-planting and seeds.
Differentials
The only one in the market with a dual dosing system of the product flow (normal / fine), for regulation of small and large applications rates.
Individual and bipartite flow dosing gates, with hydraulic opening control
Distribution discs, flow regulators, vanes and front disc protector made of stainless steel
Special protection system for the seed and fertilizer particles through a deflector that interrupts the air channel, forming a protection curtain
Technical Specifications
|
Coupling System |
|
Three-point Category II |
|
|
Volumetric capacity |
|
1.35 m³ |
|
|
Maximum charge capacity |
|
1.350 Kg |
|
|
Adjustable distribution width |
|
Up to 36 m |
|
|
PTO rotation |
|
540 rpm |
|
|
Height of the discs to the ground recommended during operation |
|
800 mm |
|
|
Minimum lifting capacity of the tractor's hydraulic system |
|
2.500 kg |
|
|
Height |
|
1.180 mm |
|
|
Width |
|
2.300 mm |
|
|
Length |
|
1.320 mm |
|
|
Approximate empty weight |
|
245 kg |
|
Tank
Tank made of rotomolded polyethylene attachable to the chassis.
Fixing of the tank to the chassis, through two suspension bolts with eyebolts, which provide efficient fixation, easy dismounting of the tank and safe lifting of the Lancer.
Protective sleeves for the flow dosing system and tank bases, made of injected nylon.
Protective hats made of injected polyethylene, attached to the sieves and positioned on the agitators, provide continuous flow and prevent the grinding of the product to be distributed.
Distribution System
Distribution discs, flow regulators, vanes, and front protector of the discs made of stainless steel plate.
Double flow dosing system of the product (fine/normal), allows the regulation of small and large application rates.
Individual and biparted product flow dosage gates, with opening control through graduated rods and adjustable stops, made of injected nylon, which provide an accurate flow
Drive for opening and closing of the flow dosage gates, through cables.
Protection curtains (deflector plates), positioned under the flow dosage gates, avoid the impact and rebound of the product particles on the disks.
Centrifugal-type distribution system, composed of two concave discs with four adjustable vanes in three different angular positions.
Three sizes (length) of vanes that allow three configurations of mounting on each disc and determine four different distribution widths.
Drive of the distribution discs
By Cardan 540 rpm.
Transmission box in oil bath.
Coupling
Three-point Category II
