+55 (54) 3332-6500 Não me Toque / Rio Grande do Sul Work with us Staff Portal What are you looking for?

O que você Procura?

Distribution Coupled by the traction bar Lancer Maximus 27.000 PLUS TH

Spartlancer 27.000 PLUS TH

Differentials

Section cut-off gates

Independent hydraulic transmission

Dual pump, belt drive, and individual discs

SMART JAN variable rate kit

Stainless steel discs

Distribution disc feed assembly with high abrasion rubber belt

Distribution of granular fertilizers and similar products: Two larger blades and two smaller blades on each disc, arranged alternately

Distribution of powdered and similar products: Four intermediate blades on each disc

Grid kit for granular fertilizers and similar products

Materials in contact with the product to be distributed, made of stainless steel

Two models of deposition funnels for distribution and a collecting funnel for flow testing, all with quick-change system

Optional items

Kit for limestone and similar materials

Smart Jan variable rate kit

Protective arch kit for distribution discs

Tray kit (8 trays and 8 grids)

Maximus Distribution Kit

Truck Mounting

Technical Specifications

Capacity 13.5 m³
Maximum Load Capacity 20.250 Kg
Coupling System Traction Bar
Power Required 140 à 180 CV
Distribution Width Plus Kit Up to 40 m
Maximus Kit Distribution Width Up to 36 m
TDP rotation 540/1.000 Rpm
Free clearance under the axle 442 mm
Disc Height to Ground Distribution Plus Kit 678 mm
Disc Height to Ground Maximus Distribution Kit 749 mm
Ground Clearance 2.724 mm
Height of the Lancer to the Ground with Arches for Canvas 2.964 mm
Total Width 3.775 mm
Length 7.760 mm
Wheel (Tire/Rim) 23.1/26 – 30.5/32 (Standard) / 650/65-30.5 – 850/50-30.5 (Optional)
Wheelbase 3.000 mm
Approximate empty weight with tires 6.500 kg

Gallery

05.webp 06.webp 07.webp

Technical characteristics of the treadmill

The smaller rollers, the drive roller, and the driven roller are mounted directly on the equipment chassis, with the smaller rollers housed in cutouts made in the chassis spar itself, while the driven and drive rollers are mounted on bearings bolted to the chassis.

The driven roller and the traction roller are conical, which keeps the belt centered, preventing it from derailing to either side.

Extra abrasion rubber belt, made of nylon canvas and factory vulcanized seams.

Access to the track for maintenance on the rollers or the track itself is achieved by removing the assembled tank assembly. To do this, loosen the screws that connect the side reinforcements of the tank to the chassis and the quick couplings that feed the cutting gate cylinders. After that, using a hoist or winch, remove the tank assembly, giving free access to the conveyor components.

Conveyor belt protective deflector, located on the inside of the tank, arranged longitudinally to the movement of the conveyor belt. It allows them to be mounted at different heights, which determine the size of the opening and the passage of the product.

Conveyor belt drive

Side track speed transmission system via a hydraulic motor directly coupled to the RJ5 gearbox (40:1).

Oil-bath crown and worm gear reducer, with bolted flange system on the track drive shaft, i.e., without shear pin.

The oil flow to the motor is controlled by a combined control block.

Distribution System

The distribution system consists of two distribution discs made of stainless steel sheet, with four vanes on each disc, containing five angle adjustment options, with intermediate positions.

Granular fertilizer distribution system with deposition point adjustment via a scale located above the discs, enabling fine adjustment of the distribution profile obtained.

For granular fertilizers, the product deposition point is centered on the discs, causing the product to be guided to the center of the discs through funnels and flow freely to the vanes, reducing the breakage of the product to be distributed, increasing the width and improving the distribution profile.

For limestone distribution, use the specific funnel for this product, made with a quick-change system.

The discs have a vane model with two lengths and two recommended mounting combinations.

Distribution of granular fertilizers and similar products: Two larger vanes and two smaller vanes on each disc, arranged alternately.

Distribution of powdered products and similar products: Four smaller vanes on each disc.

Blades made of carbon steel with heat and surface treatment.

Hinged rear cover to inspect the product outlet and facilitate funnel replacement.

Two models of standard discharge hoppers with quick-change system, made of stainless steel sheet for specific use in the distribution of granular fertilizers, powdered products, and similar materials.

A collection hopper with quick-change system for flow testing.

Hydraulically operated shut-off gates to alternately interrupt the feed to the distribution discs.

Dispersing curtain (support with chain links over the deposit hopper).

Activation of the distribution discs

The distribution discs are driven by a hydraulic motor model coupled to the transmission box.

The oil flow to the hydraulic motor is controlled by a combined control block.

Transmission box with free rotation in oil bath.

Filmed

Front swing arm with steering rods and articulation bearings with bronze bushings

Deposit

Access ladder to the Lancer, located on the side of the machine. It has an articulation (folding) system to increase the clearance during distribution work.

Materials in contact with the product to be distributed are made of stainless steel, such as the distribution discs, the rear protector against disc throw, the rear cover, and the deposit funnels.

Deposit made of removable stainless steel, bolted with side reinforcements to the chassis.

Downloads

Maximus Plus Prospectus

Request your quote

Similar Products