A Jan utiliza cookies e outras tecnologias semelhantes para melhorar a sua experiência, de acordo com a nossa Política de Privacidade e, ao continuar navegando, você concorda com estas condições.
-svg.svg){kind=logo}
Lancer Maximus 12.000 PLUS TH
Lancer Maximus 15.000 PLUS TH
Lancer Maximus 27.000 PLUS TH
Lancer Maximus 32.000 PLUS TH
Lancer Maximus 12.000 PLUS TH
Lancer Maximus 15.000 PLUS TH
Lancer Maximus 27.000 PLUS TH
Lancer Maximus 32.000 PLUS TH
Section cut-off gates
Independent hydraulic transmission
Dual pump, belt drive, and individual discs
SMART JAN variable rate kit
Stainless steel discs
Distribution disc feed assembly with high abrasion rubber belt
Distribution of granular fertilizers and similar products: Two larger blades and two smaller blades on each disc, arranged alternately
Distribution of powdered and similar products: Four intermediate blades on each disc
Grid kit for granular fertilizers and similar products
Materials in contact with the product to be distributed, made of stainless steel
Two models of deposition funnels for distribution and a collecting funnel for flow testing, all with quick-change system
Kit for limestone and similar materials
Smart Jan variable rate kit
Protective arch kit for distribution discs
Tray kit (8 trays and 8 grids)
Maximus Distribution Kit
Truck Mounting
| Capacity | 16 m³ |
| Maximum Load Capacity | 24.000 Kg |
| Coupling System | Traction Bar |
| Power Required | 180 |
| Distribution Width Plus Kit | Up to 40 m |
| Maximus Kit Distribution Width | Up to 36 m |
| TDP rotation | 540/1.000 Rpm |
| Free clearance under the axle | 442 mm |
| Disc Height to Ground Distribution Plus Kit | 678 mm |
| Disc Height to Ground Maximus Distribution Kit | 749 mm |
| Ground Clearance | 2.816 mm |
| Height of the Lancer to the Ground with Arches for Canvas | 3.122 mm |
| Total Width | 3.775 mm |
| Length | 7.760 mm |
| Wheel (Tire/Rim) | 23.1/26 – 30.5/32 (Standard) / 650/65-30.5 – 850/50-30.5 (Optional) |
| Wheelbase | 3.000 mm |
| Approximate empty weight with tires | 6.700 Kg |
The smaller rollers, the drive roller, and the driven roller are mounted directly on the equipment chassis, with the smaller rollers housed in cutouts made in the chassis spar itself, while the driven and drive rollers are mounted on bearings bolted to the chassis.
The driven roller and the traction roller are conical, which keeps the belt centered, preventing it from derailing to either side.
Extra abrasion rubber belt, made of nylon canvas and factory vulcanized seams.
Access to the track for maintenance on the rollers or the track itself is gained by removing the assembled tank assembly. To do this, loosen the screws that connect the side reinforcements of the tank to the chassis and the quick couplings that feed the cutting gate cylinders. After that, using a hoist or winch, remove the tank assembly, giving free access to the conveyor components.
Conveyor belt protective deflector, located on the inside of the tank, arranged longitudinally to the movement of the conveyor belt. It allows them to be mounted at different heights, which determine the size of the opening and the passage of the product.
Side track speed transmission system via a hydraulic motor directly coupled to the RJ5 gearbox (40:1).
Oil-bath crown and worm gear reducer, with bolted flange system on the track drive shaft, i.e., without shear pin.
The oil flow to the motor is controlled by a combined control block.
The distribution system consists of two distribution discs made of stainless steel sheet, with four vanes on each disc, containing five angle adjustment options, with intermediate positions.
Granular fertilizer distribution system with deposition point adjustment via a scale located above the discs, enabling fine adjustment of the distribution profile obtained.
For granular fertilizers, the product deposition point is centered on the discs, causing the product to be guided to the center of the discs through funnels and flow freely to the vanes, reducing the breakage of the product to be distributed, increasing the width and improving the distribution profile.
For limestone distribution, use the specific funnel for this product, made with a quick-change system.
The discs have a vane model with two lengths and two recommended mounting combinations.
Distribution of granular fertilizers and similar products: Two larger vanes and two smaller vanes on each disc, arranged alternately.
Distribution of powdered products and similar products: Four smaller vanes on each disc.
Blades made of carbon steel with heat and surface treatment.
Hinged rear cover to inspect product output and facilitate funnel replacement.
Two models of deposit funnels (standard), with quick-change system, made of stainless steel sheet for specific use in fertilizer distribution.
Blades made of carbon steel with heat and surface treatment.
Hinged rear cover for inspecting product output and facilitating funnel replacement.
Two models of deposit funnels (standard), with quick-change system, made of stainless steel sheet for specific use in the distribution of granular fertilizers, powdered products, and similar items.
A collection hopper, with quick-change system, for flow testing.
Hydraulically operated shut-off gates to alternately interrupt the feed to the distribution discs.
Dispersing curtain (support with chain links over the discharge hopper).
The distribution discs are driven by a hydraulic motor model coupled to the transmission box.
The oil flow to the hydraulic motor is controlled by a combined control block.
Transmission box with free rotation in oil bath.
Front swing arm with steering rods and articulation bearings with bronze bushings
Access ladder to the Lancer, located on the side of the machine. It has an articulation (folding) system to increase the clearance during distribution work.
Materials in contact with the product to be distributed are made of stainless steel, such as the distribution discs, the rear protector against disc throw, the rear cover, and the deposit funnels.
Deposit made of removable stainless steel, bolted with side reinforcements to the chassis.
Header coupling with ball joint to the tractor's drawbar. It also has a chain system to prevent accidents caused by the Lancer becoming uncoupled and rearing up due to unintentional disconnection from the tractor's drawbar.
Removable axle and tandem assemblies;
Tandems secured by surface-treated bolts and nuts, with lateral articulation and vertical angle limiter stop;
Adjustable wheelbase through lateral displacement of the tandem assembly;
Header coupling with ball joint to the tractor's drawbar. It also has a chain system to prevent accidents caused by the Lancer becoming uncoupled and rearing up due to unintentional disconnection from the tractor's drawbar.
Removable axle and tandem assemblies;
Tandems secured by surface-treated bolts and nuts, with lateral articulation and vertical angle limiter stop;
Adjustable wheelbase through lateral displacement of the tandem assembly;
Maximus Plus Prospectus
