A Jan utiliza cookies e outras tecnologias semelhantes para melhorar a sua experiência, de acordo com a nossa Política de Privacidade e, ao continuar navegando, você concorda com estas condições.
-svg.svg){kind=logo}
Lancer Magnu 10.000
Lancer Magnu 10.000 Stainless Steel
Lancer Magnu 10.000 Plus
Lancer Magnu 20.000
Lancer Magnu 10.000 Plus TH
Lancer Magnu 10.000
Lancer Magnu 10.000 Stainless Steel
Lancer Magnu 10.000 Plus
Lancer Magnu 20.000
Lancer Magnu 10.000 Plus TH
Cross belt with rubber coating
Transmission ratio for low and high doses
Two models of deposition hopper
Protection arch for distribution discs
Modulated stainless steel reinforced belt kit
Stainless steel distribution disk kit
Internal protection grid kit for granulated fertilizers and similar
Internal protection grid kit for limestone and similar
| Coupling system | Traction bar |
| Volumetric capacity | 5.00 m³ |
| Maximum charge capacity with limestone (1500kg/m³) | 10.000 Kg |
| Required power | 95 to 110 CV |
| Distribution width | 6 to 25 m |
| Wheelset | (tyre/rim) 12.4-24 TM 95 (10 canvas) / W 10-24 |
| PTO rotation | 540 rpm |
| Track gauge | 1.900 mm |
| Free span under axle | 470 mm |
| Height of the discs to the ground | 790 mm |
| Height | 2.332 mm |
| Width | 2.225 mm |
| Length | 5.245 mm |
| Approximate empty weight with tires | 2.100 Kg |
Cross belt with rubber coating type high-abrasion conveyor belt with polyester threads in the weft;
Reinforced belt chain, made from the roller system, provides higher charge capacity and lower maintenance rate.
Dripping system for the lubrication of the belt chain.
Belt deflector protector, located in the internal part of the tank arranged transversally to the belt displacement.
Direct VCR of the tractor with minimum requirement of 45/lpm, driving the hydraulic motor, equipped with roller chain gears that allow three different combinations.
The oil flow to the motor is controlled by a control block.
Reducer type crown and worm shaft in oil bath, with flange system screwed to the belt drive shaft, i.e., without fuse pin.
Two distribution discs with four vanes each, containing five angular adjustment options.
Two models of deposition hoppers (standard), for specific use in the distribution of granulated fertilizers, powder products, and similar.
The distribution discs are driven by a hydraulic motor coupled to the transmission box.
The oil flow to the motor is controlled by a control block.
Transmission box in oil bath.
Dismountable axle and tandem set.
Wheelset axle ends with quick-change system.
Tank made of carbon plate, with lateral reinforcements to the chassis.
Hitching of the header with ball joint to the tractor drawbar.
English Catalog
