+55 (54) 3332-6500 Não-Me-Toque / Rio Grande do Sul Work with us Staff Portal What are you looking for?

O que você Procura?

Grain Supply and Transport Grain Cart Tanker Fast 50.000

50.000 Tanker Fast

Differentials

Unloading capacity of 200 bags per minute.

Intake box: cushions the grain, avoiding pressure and friction and protecting grain integrity.

Hardened augers.

Upper auger mounted on spring-supported bearings.

Gates for inspection, cleaning and unloading into hoppers, located at the bottom of the discharge tube and the hopper.

Technical Specifications

Coupling system Drawbar
Minimum required power 240 HP
Axle with brakes (Optional) Actuation via tractor remote valve (VCR)
PTO rotation 540/1,000 rpm
Volumetric capacity 50,000 L
Capacity in bags (soybean) 625
Unloading capacity (bags/min) 200
Unloading time 10 min
Discharge tube diameter 475 mm
Unloading height with flow director 4,500 mm
Standard wheels (6) (Tire/Rim) (without tires): DW 27A-32
Track width 3,682 1
Outer tire width 4,453 1
Height with tarpaulin arches 4,220 1
Length 12,100 mm
Approximate empty weight with tires 14,400 kg
Note According to the wheel set fitted.

Discharge tube

Coupled to the intake box, which cushions the grain, avoiding pressure and friction and protecting grain integrity.

  • Equipped with a flow director to better guide the load into the truck.
  • Fed by a horizontal auger located at the inner base of the hopper.
  • With an opening and closing adjustment system for the discharge-tube flow control, via an external lever actuated by a hydraulic cylinder.
  • Upper auger support bearing of the discharge tube mounted on helical springs.
  • The discharge-tube articulation is done by a hydraulic cylinder, equipped with an exclusive mechanical locking system in the unloading position.
  • Rear support bearing of the horizontal auger, located on the outside of the hopper.
  • For operations that do not require product removal through the discharge tube, use the lower outlets.
  • Gate located at the base of the discharge tube, on the left side, used for inspection and unloading into hoppers.
  • Drive cardan with one free-rotation end and one torque end with a shear pin.
  • Oil-bath transmission box.

Hopper

Hopper made of removable carbon-steel sheet.

Tarpaulin arches.

Two gates located under the hopper, used for inspection and unloading into a hopper, manually operated.

Wheel set

Axle ends with quick-change system.

Wheel set with 6 wheels.

Hub with 10 holes.

Coupling

Coupling hitch to the tractor drawbar with ball joint.

Optional

AG 27 wheels (6).

Downloads

Tanker Fast Brochure

Request your quote

Similar Products